In optical communication network, signals travel through fibers for very large distances without significant attenuation. However, when the signals need to transmit several hundreds of kilometers, it becomes necessary to amplify the signals during transit. EDFA (erbium doped fiber amplifier), commercialized in the early 1990’s, became a key enabling technology for optical communication networks, and […]
EDFA
Dual Stage EDFA with DCM Mid-Stage Access – DCM-optimized EDFA
Besides optical amplifiers, modern optical networks also require other components to be place along the link, such as the Dispersion Compensation Module (DCM) used to correct signal distortion due to Chromatic Dispersion of the transmission fiber. Since the attenuation of DCM can be quite large, in the range of 5 to 10 dB, additional amplification […]
Variable Gain EDFA – Large Dynamic Gain Range & Better Noise Figure Performance
In order to support different span lengths between Optical Amplifiers in a transmission link, as well as to provide for aging of the link, it is desirable for an optical amplifier to support as large as possible dynamic gain range, i.e. to allow the gain to be dynamically configured over a wide range. For a […]